The following refers to the early c50 model line: | Total length | 1,795 mm (70.67 in) | | Total width | 640 mm (25.19 in) | | Total height | 975 mm (38.4) | | Wheel base | 1,185 mm (46.65 in) | | Dry Weight | 68 kg (152 lb) | | Engine type | AA01E air-cooled 4-cycle SOHC single-cylinder | | Displacement | 49 cc (3.0 cu in) | | Compression ratio | 8.8:1 | | Bore x Stroke | 39.0 x 41.4 | | Max Power output | 4.8 hp at 10000 rpm | | Max Torque | 4.7 N·m (3.5 ft·lbf) at 4500 rpm | | Max speed | 80 km/h (50 mph) | | Carburetor type | DP13N13 | | Lubrication | Forced pressure wet sump combined use system | | Fuel tank capacity | 4.0 L (7.04 Pints) – Reserve has 0.8 L (1.41 Pints) | | Fuel Consumption | 150-200mpg | | Clutch | Wet multi-plate, operated both by centrifugal action and by gear-lever. | | Transmission type | 3-speed rotary type (4-speed some models) | | Gear ratio | 3.272, 1.764, 1.190 | | Reduction gear ratio | 4.058/3.076 | | Starter | Kick (electric start optional on some models) | | Ignition | Capacitor Discharge Ignition (CDI Magneto) system (earlier models Flywheel contact-breaker points) | | Front Suspension | Hydraulically damped Leading link (also known as Bottom link) | | Rear Suspension | Pressed Steel swinging arm controlled by hydraulically damped suspension units | | Tire sizes (F/R) | 2.25-17 33L | | Front Brake | Drum, cable operated | | Rear Brake | Drum, rod operated | | Frame type | Low floor backbone pressed steel tube system |
HELP!... If you notice any mistakes here in the figures, or wish to see some more specs added,just let us know and we will update the listing.
Thanks! .
|
Honda 50 Specifications
