The following refers to early c90 models | Total length | 1,830 mm (72.10 in) | | Total width | 640 mm (25.19 in) | | Total height | 995 mm (39.2) | | Wheel base | 1,190 mm (46.89 in) | | Dry Weight | 85 kg (187 lb) | | Engine type | AA01E air-cooled 4-cycle SOHC single-cylinder | | Displacement | 89.6 cc | | Compression ratio | 8.2:1 | | Bore x Stroke | 50.0mm x 41.4 | | Max Power output | 7.5 bhp at 9,500 rpm | | Max Torque | 4.7 N·m (3.5 ft·lbf) at 4500 rpm | | Max speed | 80 km/h (50 mph) | | Carburetor type | PW15HAI | | Lubrication | Forced pressure wet sump combined use system | | Fuel tank capacity | 4.0 L (7.04 Pints) – Reserve has 0.8 L (1.41 Pints) | | Fuel Consumption | 150-200mpg | | Clutch | Wet multi-plate, operated both by centrifugal action and by gear-lever. | | Transmission type | 3-speed rotary type (4-speed some models) | | Gear ratio | (1st)2.538:1,(2nd) 1.555:1, (3rd)1.000:1 | | | | | Starter | Kick (electric start optional on some models) | | Ignition | Capacitor Discharge Ignition (CDI Magneto) system (earlier models Flywheel contact-breaker points) | | Front Suspension | Hydraulically damped Leading link (also known as Bottom link) | | Rear Suspension | Pressed Steel swinging arm controlled by hydraulically damped suspension units | | Tire sizes (F/R) | 2.50-17 33L | | Front Brake | Drum, cable operated | | Rear Brake | Drum, rod operated | | Frame type | Low floor backbone pressed steel tube system |
HELP!... If you notice any mistakes here in the figures, or wish to see some more specs added, just let us know and we will update the listing.
Thanks! .
|
Honda 90 Specifications
